Chevrolet Blazer S-10 Leveling Kits

Best Leveling Kits for Chevrolet Blazer S-10

The leveling kit ensures that the front end of the Chevrolet Blazer is leveled so that it has been combined with the rear suspension, creating a truck of sorts. The Chevrolet Blazer comes from the factory with a small rake that heads down from the rear of the vehicle to the front. The even suspension compensates for this rake, making the front end of the Chevrolet Blazer look more even.

Leveling Kits for Chevrolet Blazer 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

Features

• COMPATIBLE WITH 1983 – 2005 Chevrolet Blazer S-10 (4WD Only)
• CONTENTS: (2x) High-Strength Steel Add-A-Leafs, (4x) Vibration Isolator Pads, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
• TECHNICAL NOTES: 1.5-2 inch rear suspension lift, depending on the condition of your leaf packs. | Leaf Specifications: 2.5″ Wide, 21.25″ Top Length, 21.5″ Curved Length
• INSTALLATION: After an easy 1-2 hour installation process*, you’re ready to feature your new and improved ride! *A Leaf Spring Unloading/Compressing Tool is required to ensure a safe disassembly of your leaf pack. *An alignment is always recommended if you are altering the height of your vehicle. | **Also, longer U-Bolts may be required in order to restore the necessary clamping force on your spring assembly.
• BENEFITS: Supreme Suspensions Add-A-Leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires.

Leveling Kits for Chevrolet Blazer 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

Features

• COMPATIBLE WITH 1983 – 2005 Chevrolet Blazer S-10 (2WD 4WD).
• CONTENTS: 2x Rear Carbon Steel Shackles, Installation Hardware, Installation Instructions and Pro Pack.
• INSTALLATION: Easy ‘bolt-on’ installation takes 1 – 2 hours. No special tools are required.
• TECHNICAL NOTES: Designed to lift your ride 2 inches. Maintains factory ride quality.
• BENEFITS: Improves the look of your vehicle and increases ground clearance, so you can fit larger custom rims and tires. Factory shocks can be reused.

Leveling Kits for Chevrolet Blazer S-10 Buying Guide

Benefits of Leveling Kits for Chevrolet Blazer S-10

The difference in height between the rear and front of your Chevrolet Blazer can be as little as one inch and if your Chevrolet Blazer is not aligned, there is often a visual mismatch. Leveling Kits for Chevrolet Blazer can correct this in no time. Leveling Kits for Chevrolet Blazer are easy to install and they can align your Chevrolet Blazer on both ends in just a few hours.

The benefits of Leveling Kits for Chevrolet Blazer S-10 can be quite significant

• You can use larger wheels for your Chevrolet Blazer with enough clearance to prevent friction.
• Leveling Kits for Chevrolet Blazer can add extra support for the front equipment, preventing possible sagging.
• You’ll prevent a common sagging problem in the lower Chevrolet Blazer.
• An equalizer for the Chevrolet Blazer can reduce braking pressure, especially when you need to brake quickly.
• Your Chevrolet Blazer will become more balanced, reducing excessive wear.

The Most Common Types of Leveling Kits

All leveling kits can have the same effect on your Chevrolet Blazer – raising the front of the Chevrolet Blazer and leveling its height. None of the leveling kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Leveling Kits for Chevrolet Blazer will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.

How to Install Lift Kit on a Chevrolet Blazer S-10?

Before commencing installation of the Body Lift Kits for Chevrolet Blazer, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.

After installation, we recommend taking your Chevrolet Blazer to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Chevrolet Blazer.

Note that there are two types of lift kits – suspension lift kits and body lift kits for the Chevrolet Blazer. The installation of each is markedly different, so be sure to read the correct instructions below.

Minimum tools needed to install Body Lift Kits for Chevrolet Blazer S-10

• Pry bars are needed to remove any parts.
• PB Blaster is a penetrating oil that is better suited to elastic mounts.
• A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
• Vehicle jacks and stands rated for your Chevrolet Blazer are needed to reach all Chevrolet Blazer suspension parts.
• A torque wrench is needed to fit the reinforcements to the correct torque.
• A lug wrench is needed to save time when removing lugs from the strut.
• Screwdriver for unscrewing parts and reassembling parts.
• Hammer to break out old parts.

Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Chevrolet Blazer and are advisory in nature.

Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Chevrolet Blazer S-10 from the ground.

Installing Lift Kits for Chevrolet Blazer S-10

1. Disconnect the negative battery terminal.
2. Loosen the lug nuts.
3. Position the front of the Chevrolet Blazer at a height high enough for you to climb under the vehicle and install the new components.
4. Always fit protective stands under each side of the Chevrolet Blazer S-10 for support.
5. Raise the floor jack under the axle to support the weight of the Chevrolet Blazer as the suspension components are removed.
6. Remove the wheels of the Chevrolet Blazer.
7. Remove the following components: Running shocks, U-bolts, and springs from your Chevrolet Blazer.
8. Take the new U-bolts and fit them to your Chevrolet Blazer where the old ones used to be.
9. Assemble the shocks using the kit’s instructions.
10. Ensure that all nuts, bolts, and new components on your Chevrolet Blazer are securely fastened (use a torque wrench).
11. Remove the safety struts and carefully lower your Chevrolet Blazer S-10 while holding it level.
12. Re-clamp the battery’s negative terminal.
13. Repeat the steps above for the rear suspension for the Chevrolet Blazer.

Leveling Kits for Chevrolet Blazer S-10 FAQ:

You can see our answers to some of the most frequently asked questions about Leveling Kits for Chevrolet Blazer.

Q. How big is the tire I can install with the Leveling Kits for the Chevrolet Blazer S-10?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Chevrolet Blazer, but it will vary depending on the elevation of the leveling kit.

Q. Can I install Leveling Kits for my Chevrolet Blazer myself?
A. Most Leveling Kits can easily be installed by yourself in your garage. Leveling Kits for the Chevrolet Blazer S-10 include all the necessary parts and you don’t need any special equipment for installation.

Q. What are the Leveling Kits for Chevrolet Blazer used for?
A. Leveling Kits are needed to make your Chevrolet Blazer S-10 look more level. Leveling Kits can add lift, balance your Chevrolet Blazer and offer other great benefits.