Best Leveling Kits for Ford Bronco 2
A leveling kit is designed to level the front of Ford Bronco 2 so that it becomes level with the rear suspension of the vehicle, ultimately giving your truck that LEVELED look. Ford Bronco 2 comes from the factory with a small downward rake from the back of the vehicle to the front. A leveling kit is designed to be added to the OEM suspension, which will ultimately help offset this rake by bringing the front of the Ford Bronco 2 to a more even stance.
Leveling Kits for Ford Bronco II 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
Features
- COMPATIBLE WITH 1983 – 1996 Ford Bronco II. *Will NOT fit vehicles with Twin Traction Beam Suspension.
- CONTENTS: (2x) T6 Billet Aluminum Spring Spacers, (2x) 5/8″ Stud Extenders, (2x) High-Strength Steel Add-A-Leaf Springs, (4x) Poly Isolator Pads, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: 2-inch front + 1.5-2 inch rear suspension leveling lift. An alignment is always recommended if you are altering the height of your vehicle.
- INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A Leaf Spring unloading/compressing tool is required for a safe installation.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment and eliminates vibrations in the driveline. Enhance vehicle spring rate and increase the load and towing capacity.
Features
- Fits 1983-1996 Ford Bronco II * Willn’t fit vehicles with Twin I-Beam Suspension.
- 2x Silver Billet Aluminum Lower Coil Spring Spacers, 2x 3/4″ Stud Extensions
- Transferable Lifetime Warranty and 100% Customer Satisfaction Guarantee
- Includes installation instructions. Perfect for DIY using basic hand tools, No Cutting or Welding required
- All orders ship the Same Day when payment is processed before 3pm PST. Exec Sundays and Holidays.
Features
- COMPATIBLE WITH 1983 – 1996 Ford Bronco II. *Will NOT fit vehicles with Twin Traction Beam Suspension.
- CONTENTS: (2x) T6 Billet Aluminum Spring Spacers, (2x) 5/8″ Stud Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: 2-inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
- INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment and eliminates vibrations in the driveline.
Leveling Kits for Ford Bronco II Buying Guide
Benefits of Leveling Kits for Ford Bronco II
The difference in height between the rear and front of your Ford Bronco can be as little as one inch and if your Ford Bronco is not aligned, there is often a visual mismatch. Leveling Kits for Ford Bronco can correct this in no time. Leveling Kits for Ford Bronco II is easy to install and they can align your Ford Bronco on both ends in just a few hours.
The benefits of Leveling Kits for Ford Bronco II can be quite significant
- You can use larger wheels for your Ford Bronco with enough clearance to prevent friction.
- Leveling Kits for Ford Bronco can add extra support for the front equipment, preventing possible sagging.
- You’ll prevent a common sagging problem in the lower Ford Bronco II.
- An equalizer for the Ford Bronco can reduce braking pressure, especially when you need to brake quickly.
- Your Ford Bronco will become more balanced, reducing excessive wear.
The Most Common Types of Leveling Kits
All leveling kits can have the same effect on your Ford Bronco – raising the front of the Ford Bronco II and leveling its height. None of the leveling kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Leveling Kits for Ford Bronco will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.
How to Install Lift Kit on a Ford Bronco II?
Before commencing installation of the Body Lift Kits for Ford Bronco, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.
After installation, we recommend taking your Ford Bronco II to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Nissan Armada.
Note that there are two types of lift kits – suspension lift kits and body lift kits for the Ford Bronco. The installation of each is markedly different, so be sure to read the correct instructions below.
Minimum tools needed to install Body Lift Kits for Ford Bronco II
- Pry bars are needed to remove any parts.
- PB Blaster is a penetrating oil that is better suited to elastic mounts.
- A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
- Vehicle jacks and stands rated for your Ford Bronco II are needed to reach all Ford Bronco II suspension parts.
- A torque wrench is needed to fit the reinforcements to the correct torque.
- A lug wrench is needed to save time when removing lugs from the strut.
- Screwdriver for unscrewing parts and reassembling parts.
- Hammer to break out old parts.
Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Ford Bronco and are advisory in nature.
Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Ford Bronco II from the ground.
Installing Lift Kits for Ford Bronco II
- Disconnect the negative battery terminal.
- Loosen the lug nuts.
- Position the front of the Ford Bronco at a height high enough for you to climb under the vehicle and install the new components.
- Always fit protective stands under each side of the Ford Bronco II for support.
- Raise the floor jack under the axle to support the weight of the Ford Bronco as the suspension components are removed.
- Remove the wheels of the Ford Bronco.
- Remove the following components: Running shocks, U-bolts, and springs from your Ford Bronco II.
- Take the new U-bolts and fit them into your Ford Bronco where the old ones used to be.
- Assemble the shocks using the kit’s instructions.
- Ensure that all nuts, bolts, and new components on your Ford Bronco are securely fastened (use a torque wrench).
- Remove the safety struts and carefully lower your Ford Bronco II while holding it level.
- Re-clamp the battery’s negative terminal.
- Repeat the steps above for the rear suspension for the Ford Bronco.
Leveling Kits for Ford Bronco II FAQ:
You can see our answers to some of the most frequently asked questions about Leveling Kits for Ford Bronco II.
Q. How big is the tire I can install with the Leveling Kits for the Ford Bronco II?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Ford Bronco II, but it will vary depending on the elevation of the leveling kit.
Q. Can I install Leveling Kits for my Ford Bronco II myself?
A. Most Leveling Kits can easily be installed by yourself in your garage. Leveling Kits for the Ford Bronco II include all the necessary parts and you don’t need any special equipment for installation.
Q. What are the Leveling Kits for Ford Bronco II used for?
A. Leveling Kits are needed to make your Ford Bronco II look more level. Leveling Kits can add lift, balance your Ford Bronco II and offer other great benefits.
