Best Body Lift Kits for Ford Explorer
The body lift kit raises the body of your Ford Explorer by several inches, leaving the suspension and wheels at their original height. This is done by adding spacers over the original bushings of the car’s body mount. This type of elevator will not affect ride quality or handling in any way. This elevator is less expensive due to the less tedious installation and the fact that you may not need to purchase new shocks or wheel alignments. Ford Explorer with this elevator can maintain the factory suspension geometry and wheel alignment.
Body Lift Kit for Ford Explorer
Features
- Manufacturer – Performance Accessories
- Brand – Performance Accessories
- Item Weight – 27.2 pounds
- Product Dimensions – 16 x 4 x 12 inches
Body Lift Kits for Ford Explorer Buying Guide
Benefits of Body Lift Kits for Ford Explorer
The difference in height between the rear and front of your Ford Explorer can be as little as one inch and if your Ford Explorer is not aligned, there is often a visual mismatch. Body Lift Kits for Ford Explorer can correct this in no time. Body Kits for Ford Explorer are easy to install and they can align your Ford Explorer on both ends in just a few hours.
The benefits of Body Lift Kits for Ford Explorer can be quite significant
- You can use larger wheels for your Ford Explorer with enough clearance to prevent friction.
- Body Lift Kits for Ford Explorer can add extra support for the front equipment, preventing possible sagging.
- You’ll prevent a common sagging problem in the lower Ford Explorer.
- An equalizer for the Ford Explorer can reduce braking pressure, especially when you need to brake quickly.
- Your Ford Explorer will become more balanced, reducing excessive wear.
The Most Common Types of Body Lift Kits
All Body Lift kits can have the same effect on your Ford Explorer – raising the front of the Ford Explorer and leveling its height. None of the leveling kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Body Lift Kits for Ford Explorer will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.
How to Install Lift Kit on a Ford Explorer?
Before commencing installation of the Body Lift Kits for Ford Explorer, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.
After installation, we recommend taking your Ford Explorer to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Ford Explorer.
Note that there are two types of lift kits – suspension lift kits and body lift kits for the Ford Explorer. The installation of each is markedly different, so be sure to read the correct instructions below.
Minimum tools needed to install Body Lift Kits for Ford Explorer
- Pry bars are needed to remove any parts.
- PB Blaster is a penetrating oil that is better suited to elastic mounts.
- A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
- Vehicle jacks and stands rated for your Ford Explorer are needed to reach all Ford Explorer suspension parts.
- A torque wrench is needed to fit the reinforcements to the correct torque.
- Lug wrench is needed to save time when removing lugs from the strut.
- Screwdriver for unscrewing parts and reassembling parts.
- Hammer to break out old parts.
Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Ford Explorer and are advisory in nature.
Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Ford Explorer from the ground.
Installing Lift Kits for Ford Explorer
- Disconnect the negative battery terminal.
- Loosen the lug nuts.
- Position the front of the Ford Explorer at a height high enough for you to climb under the vehicle and install the new components.
- Always fit protective stands under each side of the Ford Explorer for support.
- Raise the floor jack under the axle to support the weight of the Ford Explorer as the suspension components are removed.
- Remove the wheels of the Ford Explorer.
- Remove the following components: Running shocks, U-bolts, and springs from your Ford Explorer.
- Take the new U-bolts and fit them into your Ford Expedition where the old ones used to be.
- Assemble the shocks using the kit’s instructions.
- Ensure that all nuts, bolts, and new components on your Ford Explorer are securely fastened (use a torque wrench).
- Remove the safety struts and carefully lower your Ford Explorer while holding it level.
- Re-clamp the battery’s negative terminal.
- Repeat the steps above for the rear suspension for the Ford Explorer.
Body Lift Kits for Ford Explorer FAQ:
You can see our answers to some of the most frequently asked questions about Body Lift Kits for Ford Explorer.
Q. How big is the tire I can install with the Body Lift Kits for the Ford Explorer?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Ford Explorer, but it will vary depending on the elevation of the leveling kit.
Q. Can I install Body Lift Kits for my Ford Explorer myself?
A. Most Body Lift Kits can easily be installed by yourself in your garage. Body Lift Kits for the Ford Explorer include all the necessary parts and you don’t need any special equipment for installation.
Q. What are the Body Lift Kits for Ford Explorer used for?
A. Body Lift Kits are needed to make your Ford Explorer look more level. Body Lift Kits can add lift, balance your Ford Explorer, and offer other great benefits.
