Best Lift Kits for GMC SIERRA 1500 AT4
Suspension Lift Kit for your GMC SIERRA vehicle. The Suspension Lift Kit allows you to increase the ground clearance of your GMC SIERRA by replacing front and rear suspension components and shock absorbers. The Suspension Lift Kit for the GMC SIERRA provides increased height between the frame and the ground. This allows for a significant increase in ground clearance. Overall articulation is improved with a good suspension kit for the GMC SIERRA. That said, even if you don’t have to crawl on four wheels or rocks, the GMC SIERRA’s appearance is much more attractive.
Suspension Lift Kits for GMC Sierra AT4 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Features
- Superlift K1000 Suspension Lift Kit w/Shocks; 2.5 in. Lift; w/Superide Shocks;
- Superlift
- K1000
- Warranty: Yes
Suspension Lift Kits for GMC Sierra AT4 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Features
- COMPATIBLE WITH 1999 – 2007(classic) GMC Sierra 1500 (4WD). It Will only fit 6-Lug Models. Will NOT Fit Models with Rear Overloads.
- CONTENTS: 2x Adjustable Front Torsion Keys, 2x Rear Lift Tapered Blocks with 9/16th Pins, 4x Square Bend U-Bolts, 4x Pro Performance Series Shocks, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack
- TECHNICAL NOTES: Adjustable 1 to 3-inch front and 2-inch rear suspension lift. This Kit Includes 4x U-Bolts: 9/16″ Threads, 12″ Long x 2.5″ Wide. Models with Rear Overload Springs will require longer Ubolts.
- INSTALLATION: Easy bolt-on installation takes 3 to 6 hours. A torsion bar puller or 5-ton gear puller is required for install. An alignment is always recommended if you are altering the height of your vehicle.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion Keys will provide an adjustable lift height according to your preference and offer increased strength compared to factory keys.
Suspension Lift Kits for GMC Sierra AT4 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Features
- 5 inch Block Kit – 1999-2010 GMC Sierra 1500 and 2500 4WD
- Fit type: Vehicle Specific
- Package Dimensions: 7.62 L x 71.12 H x 16.256 W (centimeters)
- Included components: 2 cast iron blocks, four U-bolts, all nuts and washers needed for installation Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
Suspension Lift Kits for GMC Sierra AT4 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Features
- COMPATIBLE WITH 2007 – 2020 GMC Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or GMC AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
- CONTENTS: (2x) Front Top Strut Spacers, (2x) Front Bottom Strut Spacers, (2x) Rear Lift Tapered Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
- TECHNICAL NOTES: 3.5-inch front and 3-inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed – rear lift height will vary depending on factory block size being replaced.
- INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Features
- COMPATIBLE WITH 2007 – 2020 GMC Sierra 1500 (2WD 4WD). Fits 6-Lug Model Only. Does NOT fit 2007 Classic Models or 2019+ Silverado TrailBoss and Sierra AT4 Models. These spacers are NOT compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride / Self-Leveling Suspension Systems.
- CONTENTS: (2x) Billet Aluminum Top Front Strut Spacers, (2x) Billet Aluminum Bottom Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: 3.5-inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
- INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Suspension Lift Kits for GMC SIERRA AT4 Buying Guide
Benefits of Suspension Lift Kits for GMC SIERRA AT4
The difference in height between the rear and front of your GMC SIERRA 1500 can be as little as one inch and if your GMC SIERRA is not aligned, there is often a visual mismatch. Suspension Lift Kits for GMC SIERRA can correct this in no time. Suspension Lift Kits for GMC SIERRA are easy to install and they can align your GMC SIERRA on both ends in just a few hours.
The benefits of Suspension Lift Kits for GMC SIERRA AT4 can be quite significant
- You can use larger wheels for your GMC SIERRA 1500 with enough clearance to prevent friction.
- Suspension Lift Kits for GMC SIERRA can add extra support for the front equipment, preventing possible sagging.
- You’ll prevent a common sagging problem in the lower GMC SIERRA.
- An equalizer for the GMC SIERRA can reduce braking pressure, especially when you need to brake quickly.
- Your GMC SIERRA will become more balanced, reducing excessive wear.
The Most Common Types of Suspension Lift Kits
All Suspension kits can have the same effect on your GMC SIERRA – raising the front of the GMC SIERRA and Suspension its height. None of the Suspension Lift kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Suspension Lift Kits for GMC SIERRA will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.
How to Install Lift Kit on a GMC SIERRA AT4?
Before commencing installation of the Body Lift Kits for GMC SIERRA, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.
After installation, we recommend taking your GMC SIERRA to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your GMC SIERRA.
Note that there are two types of lift kits – suspension lift kits and body lift kits for the GMC SIERRA. The installation of each is markedly different, so be sure to read the correct instructions below.
Minimum tools needed to install Body Lift Kits for GMC SIERRA AT4
- Pry bars are needed to remove any parts.
- PB Blaster is a penetrating oil that is better suited to elastic mounts.
- A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
- Vehicle jacks and stands rated for your GMC SIERRA are needed to reach all GMC SIERRA suspension parts.
- A torque wrench is needed to fit the reinforcements to the correct torque.
- A lug wrench is needed to save time when removing lugs from the strut.
- Screwdriver for unscrewing parts and reassembling parts.
- Hammer to break out old parts.
Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for GMC SIERRA and are advisory in nature.
Be sure to read the manufacturer’s instructions for installing the lift kit before removing the GMC SIERRA from the ground.
Installing Lift Kits for GMC SIERRA AT4
- Disconnect the negative battery terminal.
- Loosen the lug nuts.
- Position the front of the GMC SIERRA at a height high enough for you to climb under the vehicle and install the new components.
- Always fit protective stands under each side of the GMC SIERRA for support.
- Raise the floor jack under the axle to support the weight of the GMC SIERRA as the suspension components are removed.
- Remove the wheels of the GMC SIERRA.
- Remove the following components: Running shocks, U-bolts, and springs from your GMC SIERRA.
- Take the new U-bolts and fit them to your GMC SIERRA where the old ones used to be.
- Assemble the shocks using the kit’s instructions.
- Ensure that all nuts, bolts, and new components on your GMC SIERRA are securely fastened (use a torque wrench).
- Remove the safety struts and carefully lower your GMC SIERRA while holding it level.
- Re-clamp the battery’s negative terminal.
- Repeat the steps above for the rear suspension for the GMC SIERRA.
Suspension Lift Kits for GMC SIERRA AT4 FAQ:
You can see our answers to some of the most frequently asked questions about Suspension Lift Kits for GMC SIERRA.
Q. How big is the tire I can install with the Suspension Lift Kits for the GMC SIERRA?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your GMC SIERRA, but it will vary depending on the elevation of the leveling kit.Q. Can I install Suspension Lift Kits for my GMC SIERRA myself?
A. Most Suspension Lift Kits can easily be installed by yourself in your garage. Suspension Lift Kits for the GMC SIERRA include all the necessary parts and you don’t need any special equipment for installation.Q. What are the Suspension Lift Kits for GMC SIERRA used for?
A. Suspension Lift Kits are needed to make your GMC SIERRA 1500 look more level. Suspension Lift Kits can add lift, balance your GMC SIERRA and offer other great benefits.
