Honda CR-V Lift Kits

Honda CR-V Honda Lift Kits

Best Lift Kits for Honda CR-V

Suspension Lift Kit for your Honda CR-V vehicle. The Suspension Lift Kit increases the ground clearance of your Honda CR-V by replacing the front and rear suspension components and shock absorbers. The Suspension Lift Kit for the Honda CR-V increases the height between the frame and the ground. This allows for more ground clearance. The articulation is improved overall with a good suspension kit for the Honda CR-V. Even if you don’t have to crawl on four wheels or rocks, the look of your Honda CR-V will be much more attractive.

Honda CR-V

Suspension Lift Kits for Honda CR-V 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

lift kits honda crv


  • Complete lift kit 30mm
  • Easily maneuver in snow, dirt, and on country roads with additional clearance
  • Effortlessly park near higher curbs where previously you had to be cautious
  • Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • Please, check the compatibility in the Product description below. Not sure if the lift kit is compatible with your car? Contact us and we will suggest the proper lift kit for you!

Suspension Lift Kits for Honda CR-V Buying Guide

Benefits of Suspension Lift Kits for Honda CR-V

The difference in height between the rear and front of your Honda CR-V can be as little as one inch and if your Honda CR-V is not aligned, there is often a visual mismatch. Suspension Lift Kits for Honda CR-V can correct this in no time. Suspension Lift Kits for Honda CR-V are easy to install and they can align your Honda CR-V on both ends in just a few hours.

The benefits of Suspension Lift Kits for Honda CR-V can be quite significant

  • You can use larger wheels for your Honda CR-V with enough clearance to prevent friction.
  • Suspension Lift Kits for Honda CR-V can add extra support for the front equipment, preventing possible sagging.
  • You’ll prevent a common sagging problem in the lower Honda CR-V.
  • An equalizer for the Honda CR-V can reduce braking pressure, especially when you need to brake quickly.
  • Your Honda CR-V will become more balanced, reducing excessive wear.

The Most Common Types of Suspension Lift Kits

All Suspension kits can have the same effect on your Honda CR-V – raising the front of the Honda CR-V and Suspension its height. None of the Suspension Lift kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Suspension Lift Kits for Honda CR-V will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.

Honda CR-V

How to Install Lift Kit on a Honda CR-V?

Before commencing installation of the Body Lift Kits for Honda CR-V, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.

After installation, we recommend taking your Honda CR-V to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Honda CR-V.

Note that there are two types of lift kits – suspension lift kits and body lift kits for the Honda CR-V. The installation of each is markedly different, so be sure to read the correct instructions below.

Minimum tools needed to install Body Lift Kits for Honda CR-V

  • Pry bars are needed to remove any parts.
  • PB Blaster is a penetrating oil that is better suited to elastic mounts.
  • A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
  • Vehicle jacks and stands rated for your Honda CR-V are needed to reach all Honda CR-V suspension parts.
  • A torque wrench is needed to fit the reinforcements to the correct torque.
  • A lug wrench is needed to save time when removing lugs from the strut.
  • Screwdriver for unscrewing parts and reassembling parts.
  • Hammer to break out old parts.

how to install lift kit

Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Honda CR-V and are advisory in nature.

Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Honda CR-V from the ground.

Installing Lift Kits for Honda CR-V

  1. Disconnect the negative battery terminal.
  2. Loosen the lug nuts.
  3. Position the front of the Honda CR-V at a height high enough for you to climb under the vehicle and install the new components.
  4. Always fit protective stands under each side of the Honda CR-V for support.
  5. Raise the floor jack under the axle to support the weight of the Honda CR-V as the suspension components are removed.
  6. Remove the wheels of the Honda CR-V.
  7. Remove the following components: Running shocks, U-bolts, and springs from your Honda CR-V.
  8. Take the new U-bolts and fit them to your Honda CR-V where the old ones used to be.
  9. Assemble the shocks using the kit’s instructions.
  10. Ensure that all nuts, bolts, and new components on your Honda CR-V are securely fastened (use a torque wrench).
  11. Remove the safety struts and carefully lower your Honda CR-V while holding it level.
  12. Re-clamp the battery’s negative terminal.
  13. Repeat the steps above for the rear suspension for the Honda CR-V.

Suspension Lift Kits for Honda CR-V FAQ:

You can see our answers to some of the most frequently asked questions about Suspension Lift Kits for Honda CR-V.

Q. How big is the tire I can install with the Suspension Lift Kits for the Honda CR-V?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Honda CR-V, but it will vary depending on the elevation of the leveling kit.

Q. Can I install Suspension Lift Kits for my Honda CR-V myself?
A. Most Suspension Lift Kits can easily be installed by yourself in your garage. Suspension Lift Kits for the Honda CR-V include all the necessary parts and you don’t need any special equipment for installation.

Q. What are the Suspension Lift Kits for Honda CR-V used for?
A. Suspension Lift Kits are needed to make your Honda CR-V look more level. Suspension Lift Kits can add lift, balance your Honda CR-V and offer other great benefits.


David West

David West has extensive experience in the automotive industry and he shares his expertise with you to make choosing car parts as easy and convenient for you as possible.

Rate author