Lincoln Navigator Lift Kit

Best Lift Kits Lincoln Navigator

Suspension Lift Kit for your Lincoln Navigator vehicle. The Suspension Lift Kit increases the ground clearance of your Lincoln Navigator by replacing front and rear suspension components and shock absorbers. The Suspension Lift Kit for the Lincoln Navigator increases the height between the frame and the ground. This allows for increased ground clearance. Articulation, in general, is improved with a good Lincoln Navigator Suspension Lift Kit. And even if you don’t need to crawl on four wheels or rocks, the look of your Lincoln Navigator will be much more appealing.

Suspension Lift Kits for Lincoln Navigator

Features

• FREE Drag Link included / 2WD – RWD Vehicles Only with Idler Arm (With 2.48″ Bolt Pattern) / HEAVY DUTY KIT
• Control Arms Come Pre-Assembled With Ball Joints & Bushings / Replacement improves handling
• Advanced corrosion protection against the harshest conditions / Precision-made performance and additional strength
• Designed with PREMIUM quality materials for exceptional performance, reliability, and peace of mind
• Dust boot is re-installed and permanently attached to reduce contamination and increase durability and service life

Features

• 4WD Models / Sway Bar Frame Bushings – 27mm (1.06 inch) / Idler Arm (WITH 3.43″ BOLT PATTERN)
• Control Arms Come Pre-Assembled With Ball Joints & Bushings / Replacement improves handling
• Advanced corrosion protection against the harshest conditions / Precision-made performance and additional strength
• Designed with PREMIUM quality materials for exceptional performance, reliability, and peace of mind
• Dust boot is re-installed and permanently attached to reduce contamination and increase durability and service life

Suspension Lift Kits for Lincoln Navigator Buying Guide

Benefits of Suspension Lift Kits for Lincoln Navigator

The difference in height between the rear and front of your Lincoln Navigator can be as little as one inch and if your Lincoln Navigator is not aligned, there is often a visual mismatch. Suspension Lift Kits for Lincoln Navigator can correct this in no time. Suspension Lift Kits for Lincoln Navigator are easy to install and they can align your Lincoln Navigator on both ends in just a few hours.

The benefits of Suspension Lift Kits for Lincoln Navigator can be quite significant

• You can use larger wheels for your Lincoln Navigator with enough clearance to prevent friction.
• Suspension Lift Kits for Lincoln Navigator can add extra support for the front equipment, preventing possible sagging.
• You’ll prevent a common sagging problem in the lower Lincoln Navigator.
• An equalizer for the Lincoln Navigator can reduce braking pressure, especially when you need to brake quickly.
• Your Lincoln Navigator will become more balanced, reducing excessive wear.

The Most Common Types of Suspension Lift Kits

All Suspension kits can have the same effect on your Lincoln Navigator – raising the front of the Lincoln Navigator and Suspension its height. None of the Suspension Lift kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Suspension Lift Kits for Lincoln Navigator will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.

How to Install Lift Kit on a Lincoln Navigator?

Before commencing installation of the Body Lift Kits for Lincoln Navigator, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.

After installation, we recommend taking your Lincoln Navigator to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Lincoln Navigator.

Note that there are two types of lift kits – suspension lift kits and body lift kits for the Lincoln Navigator. The installation of each is markedly different, so be sure to read the correct instructions below.

Minimum tools needed to install Body Lift Kits for Lincoln Navigator

• Pry bars are needed to remove any parts.
• PB Blaster is a penetrating oil that is better suited to elastic mounts.
• A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
• Vehicle jacks and stands rated for your Lincoln Navigator are needed to reach all Lincoln Navigator suspension parts.
• A torque wrench is needed to fit the reinforcements to the correct torque.
• A lug wrench is needed to save time when removing lugs from the strut.
• Screwdriver for unscrewing parts and reassembling parts.
• Hammer to break out old parts.

Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Lincoln Navigator and are advisory in nature.

Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Lincoln Navigator from the ground.

Installing Lift Kits for Lincoln Navigator

1. Disconnect the negative battery terminal.
2. Loosen the lug nuts.
3. Position the front of the Lincoln Navigator at a height high enough for you to climb under the vehicle and install the new components.
4. Always fit protective stands under each side of the Lincoln Navigator for support.
5. Raise the floor jack under the axle to support the weight of the Lincoln Navigator as the suspension components are removed.
6. Remove the wheels of the Lincoln Navigator.
7. Remove the following components: Running shocks, U-bolts, and springs from your Lincoln Navigator.
8. Take the new U-bolts and fit them to your Lincoln Navigator where the old ones used to be.
9. Assemble the shocks using the kit’s instructions.
10. Ensure that all nuts, bolts, and new components on your Lincoln Navigator are securely fastened (use a torque wrench).
11. Remove the safety struts and carefully lower your Lincoln Navigator while holding it level.
12. Re-clamp the battery’s negative terminal.
13. Repeat the steps above for the rear suspension for the Lincoln Navigator.

Suspension Lift Kits for Lincoln Navigator FAQ:

You can see our answers to some of the most frequently asked questions about Suspension Lift Kits for Lincoln Navigator.

Q. How big is the tire I can install with the Suspension Lift Kits for the Lincoln Navigator?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Lincoln Navigator, but it will vary depending on the elevation of the leveling kit.

Q. Can I install Suspension Lift Kits for my Lincoln Navigator myself?
A. Most Suspension Lift Kits can easily be installed by yourself in your garage. Suspension Lift Kits for the Lincoln Navigator include all the necessary parts and you don’t need any special equipment for installation.

Q. What are the Suspension Lift Kits for Lincoln Navigator used for?
A. Suspension Lift Kits are needed to make your Lincoln Navigator look more level. Suspension Lift Kits can add lift, balance your Lincoln Navigator and offer other great benefits.