Best Leveling Kits for Toyota Tacoma
The leveling kit is designed to adjust the front of the Toyota Tacoma so that it is flush with the rear suspension of the vehicle, resulting in a unique look. The Toyota Tacoma comes from the factory with a small rake that sits down from the rear of the vehicle to the front. The alignment kit is designed to be added to the original suspension, which as a result will help balance these rakes by aligning the front of the Toyota Tacoma.
Leveling Kits for Toyota Tacoma 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Features
- COMPATIBLE WITH 1995 – 2004 Toyota Tacoma (2WD 4WD). *Will NOT Fit Tacoma 5-Lug Models.
- CONTENTS: (2x) T6 Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: 3-inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
- INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Leveling Kits for Toyota Tacoma 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Features
- COMPATIBLE WITH 1995 – 2019 Toyota Tacoma (2WD 4WD). Does not fit 5-lug models. Only fits models with single-pin leaf packs.
- CONTENTS: 2x High-Strength Steel Leaf Packs, 4x Vibration Isolator Pads, 4x Square Bend U-Bolts, Installation Hardware, Installation Instructions, and Pro Pack.
- TECHNICAL NOTES: 1.5-2 inch rear suspension lift, depending on the condition of your leaf packs.
- INSTALLATION: Easy ‘bolt-on’ installation takes 1 to 2 hours. A Leaf Spring unloading/compressing tool is required for a safe installation. An alignment is recommended after install.
- BENEFITS: Supreme Suspensions Add-A-Leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase the load and towing capacity, minimize squat and allow for larger custom rims and tires. The included U-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle, maximizing safety and ensuring that you get the most out of your rear lift.
Leveling Kits for Toyota Tacoma 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Features
- COMPATIBLE WITH 1995 – 2020 Tacoma 2WD 4WD. Does not fit 5-Lug models.
- CONTENTS: (2x) Steel Rear Lift Blocks – 9/16 Pin, (4x) Zinc Phosphate Coated U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: 1-inch rear suspension lift. | *Please note that our lift block kits are designed to be installed directly to your truck’s factory suspension, and we do NOT recommend stacking them.
- INSTALLATION: After an easy 1-2 hour installation process*, you’re ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Leveling Kits for Toyota Tacoma 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Features
- COMPATIBLE WITH 2005 – 2021 Tacoma, 2003 – 2021 4Runner, and 2007 – 2015 FJ Cruiser (2WD 4WD). Does NOT Fit Tacoma 5-Lug Models. Does NOT Fit 4Runner Limited Models w/ X-REAS Hydraulic Struts.
- CONTENTS: (2x) Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
- TECHNICAL NOTES: 2-inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
- INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
- BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment and eliminates vibrations in the driveline.
Leveling Kits for Toyota Tacoma Buying Guide
Benefits of Leveling Kits for Toyota Tacoma
The difference in height between the rear and front of your Toyota Tacoma can be as little as one inch and if your Toyota Tacoma is not aligned, there is often a visual mismatch. Leveling Kits for Toyota Tacoma can correct this in no time. Leveling Kits for Toyota Tacoma are easy to install and they can align your Toyota Tacoma on both ends in just a few hours.
The benefits of Leveling Kits for Toyota Tacoma can be quite significant
- You can use larger wheels for your Toyota Tacoma with enough clearance to prevent friction.
- Leveling Kits for Toyota Tacoma can add extra support for the front equipment, preventing possible sagging.
- You’ll prevent a common sagging problem in the lower Toyota Tacoma.
- An equalizer for the Toyota Tacoma can reduce braking pressure, especially when you need to brake quickly.
- Your Toyota Tacoma will become more balanced, reducing excessive wear.
The Most Common Types of Leveling Kits
All leveling kits can have the same effect on your Toyota Tacoma – raising the front of the Toyota Tacoma and leveling its height. None of the leveling kits are one-size-fits-all, each kit is designed for a different truck and SUV model. Each Leveling Kits for Toyota Tacoma will have a different method of installation. So before you choose any alignment kit, it’s important to know the common types so you know you’re making the right decision.
How to Install Lift Kit on a Toyota Tacoma?
Before commencing installation of the Body Lift Kits for Toyota Tacoma, be sure to read the manufacturer’s instructions included with the outboard lift kit. Our instructions are an approximate guide and not a substitute for the manufacturer’s recommendations.
After installation, we recommend taking your Toyota Tacoma to have it checked by a suspension specialist, who can ensure that all parts are in place and suitable for your Nissan Armada.
Note that there are two types of lift kits – suspension lift kits and body lift kits for the Toyota Tacoma. The installation of each is markedly different, so be sure to read the correct instructions below.
Minimum tools needed to install Body Lift Kits for Toyota Tacoma
- Pry bars are needed to remove any parts.
- PB Blaster is a penetrating oil that is better suited to elastic mounts.
- A standard socket and ¼”-1″ wrench set are needed to unscrew parts.
- Vehicle jacks and stands rated for your Toyota Tacoma are needed to reach all Toyota Tacoma suspension parts.
- A torque wrench is needed to fit the reinforcements to the correct torque.
- A lug wrench is needed to save time when removing lugs from the strut.
- Screwdriver for unscrewing parts and reassembling parts.
- Hammer to break out old parts.
Our recommendations do not replace the manufacturer’s installation manual for Body Lift Kits for Toyota Tacoma and are advisory in nature.
Be sure to read the manufacturer’s instructions for installing the lift kit before removing the Toyota Tacoma from the ground.
Installing Lift Kits for Toyota Tacoma
- Disconnect the negative battery terminal.
- Loosen the lug nuts.
- Position the front of the Toyota Tacoma at a height high enough for you to climb under the vehicle and install the new components.
- Always fit protective stands under each side of the Toyota Tacoma for support.
- Raise the floor jack under the axle to support the weight of the Toyota Tacoma as the suspension components are removed.
- Remove the wheels of the Toyota Tacoma.
- Remove the following components: Running shocks, U-bolts, and springs from your Toyota Tacoma.
- Take the new U-bolts and fit them into your Toyota Tacoma where the old ones used to be.
- Assemble the shocks using the kit’s instructions.
- Ensure that all nuts, bolts, and new components on your Toyota Tacoma are securely fastened (use a torque wrench).
- Remove the safety struts and carefully lower your Toyota Tacoma while holding it level.
- Re-clamp the battery’s negative terminal.
- Repeat the steps above for the rear suspension for the Toyota Tacoma.
Leveling Kits for Toyota Tacoma FAQ:
You can see our answers to some of the most frequently asked questions about Leveling Kits for Toyota Tacoma.
Q. How big is the tire I can install with the Leveling Kits for the Toyota Tacoma?
A. It depends on the alignment kit you choose. Some offer plenty of tire space in your Toyota Tacoma, but it will vary depending on the elevation of the leveling kit.
Q. Can I install Leveling Kits for my Toyota Tacoma myself?
A. Most Leveling Kits can easily be installed by yourself in your garage. Leveling Kits for the Toyota Tacoma include all the necessary parts and you don’t need any special equipment for installation.
Q. What are the Leveling Kits for Toyota Tacoma used for?
A. Leveling Kits are needed to make your Toyota Tacoma look more level. Leveling Kits can add lift, balance your Toyota Tacoma and offer other great benefits.
